Create a beautiful, feminine crochet set featuring delicate gray Mary Jane slippers and a matching scalloped lace collar. With pretty openwork stitches, little crochet flowers, pearl embellishments, and elegant scalloped edges, this handmade set has a lovely vintage-inspired look.

The slippers are comfortable, lightweight, and perfect for wearing around the house, while the matching lace collar makes a charming decorative accessory. This pattern is a lovely project for crocheters who enjoy creating delicate details and beautiful handmade gifts.

In this tutorial, you’ll learn how to crochet the slippers, shape the decorative toe, add the adjustable Mary Jane straps, make the little flowers, and create the matching lace collar.

Pattern details

Materials needed

• Light gray DK or sport-weight cotton yarn (approximately 250–300 g for slippers and collar)
• 3.5 mm crochet hook
• 3 mm crochet hook for flowers (optional)
• 2 small pearl buttons
• 1 larger pearl button for the collar
• Yarn needle
• Stitch markers
• Scissors
• Non-slip fabric paint for slipper soles (optional)

Abbreviations (US crochet terms)

Special stitches

Shell stitch: Work 5 dc into the same stitch or space.

Picot: Ch 3, sl st into the first chain.

V-stitch: (Dc, ch 1, dc) in the same stitch.

Puff stitch: Yarn over, insert hook, pull up a loop. Repeat 3 times in the same stitch, yarn over and pull through all loops.

Flower petal: Work (2 dc, ch 2, sl st) into the indicated space.

Part 1: Crochet Mary Jane Slippers

The slippers are made with an oval sole, a shaped upper, a decorative lace toe, and a small strap across the instep.

Step 1: Crochet the slipper sole

Make 2 soles.

Using gray yarn and a 3.5 mm hook:

Foundation: Ch 25.

Round 1:

• Sc in the second ch from hook.
• Sc in the next 22 chains.
• Work 4 sc in the last chain.
• Continue along the opposite side of the foundation chain.
• Sc in the next 22 stitches.
• Work 3 sc in the final stitch.
• Join with sl st.

Round 2:

• Ch 1.
• Sc in each stitch until you reach the rounded end.
• Work 2 sc in each of the 4 increase stitches at the first end.
• Sc along the opposite side.
• Work 2 sc in each of the 3 increase stitches at the second end.
• Join with sl st.

Round 3:

• Ch 1.
• Sc around, increasing evenly at both rounded ends to keep the sole flat.
• Join with sl st.

Continue adding rounds if you need a longer sole. For a smaller size, start with fewer foundation chains.

Sizing tip: Measure the sole against the intended foot. For an adult US 7–8, aim for approximately 24–25 cm in length. Adjust the foundation chain and rounds as necessary.

Step 2: Shape the slipper upper

Place a stitch marker at the center of the toe and another at the center of the heel.

Join gray yarn at one side of the sole.

Round 1:

• Ch 1.
• Work sc around the sole through the back loops only.
• Join with sl st.

Round 2:

• Ch 1.
• Sc around the heel and sides.
• At the front toe section, work hdc in each stitch.
• Join with sl st.

Round 3:

• Ch 1.
• Sc around the heel and sides.
• Work dc across the front toe section.
• Join with sl st.

This creates a shallow slipper base with a raised edge.

Step 3: Crochet the decorative lace toe

This is the most beautiful part of the slippers. The openwork lace creates the delicate floral appearance seen in the photograph.

Work across the front toe section only.

Row 1:

• Join yarn at one side of the toe.
• Ch 3 (counts as dc).
• Sk 1 st.
• (Dc, ch 1, dc) in the next st.
• Sk 1 st.
• Repeat across the toe.
• Turn.

Row 2:

• Ch 3.
• Work 2 dc in each ch-1 space.
• Ch 1 between groups.
• Turn.

Row 3:

• Ch 3.
• Work 1 V-stitch in the center of each previous group.
• Ch 2 between V-stitches.
• Turn.

Row 4 – Decorative shells:

• Ch 1.
• Work 5 dc in the first ch-2 space.
• Sl st in the next space.
• Repeat to create small scalloped sections.

Attach the lace section neatly to the sides of the slipper upper with slip stitches.

Step 4: Crochet the heel and sides

Join yarn at the side of the slipper.

• Work sc around the heel and both sides.
• Work approximately 3–4 rounds, depending on the desired height.
• Decrease gradually at the back if needed to create a snug fit.
• Finish with a round of reverse single crochet or ordinary sc.

Fasten off and weave in the ends.

Step 5: Make the Mary Jane strap

Make one strap for each slipper.

1. Ch 24 (adjust to fit across the instep).
2. Sc in the second chain from the hook.
3. Sc across.
4. Ch 1 and turn.
5. Work one more row of sc.
6. Fasten off, leaving a long sewing tail.

Attach one end of the strap to the inside edge of the slipper.

Sew a small loop at the opposite end or attach a tiny button to secure the strap.

Step 6: Crochet the little flower decoration

Make 2 flowers.

Round 1:

• Make a magic ring.
• Ch 1.
• Work 10 sc into the ring.
• Join with sl st.

Round 2 – Petals:

Repeat 5 times:

• Sl st into the next stitch.
• Ch 2.
• Work 3 dc into the same stitch.
• Ch 2.
• Sl st into the same stitch.

Pull the magic ring tight and fasten off.

Sew one flower onto each slipper strap. Add a small pearl bead or pearl button to the center.

Part 2: Matching Crochet Lace Collar

The matching collar is a beautiful decorative accessory featuring an openwork center, delicate fan-shaped scallops, and a small flower with a pearl center.

Step 1: Create the collar foundation

Using the same gray yarn and 3.5 mm hook:

• Ch 61.
• Sc in the second chain from the hook.
• Sc across.
• Ch 1 and turn.

This foundation creates the upper neck edge. Adjust the chain length to fit the desired neckline.

Step 2: Crochet the first lace row

Row 1:

• Ch 3 (counts as dc).
• Sk 1 stitch.
• Dc in the next stitch.
• Ch 1.
• Sk 1 stitch.
• Repeat (dc, ch 1, sk 1) across.
• Turn.

Row 2:

• Ch 3.
• Work (dc, ch 2, dc) in each ch-1 space.
• Turn.

Row 3:

• Ch 3.
• Work 3 dc into each ch-2 space.
• Ch 1 between groups.
• Turn.

Step 3: Create the decorative lace pattern

Row 4:

• Ch 3.
• Work a V-stitch in the center of each previous group.
• Ch 2 between V-stitches.
• Turn.

Row 5:

• Ch 3.
• Work 5 dc into each ch-2 space.
• Sl st into the next space.
• Repeat across.

This creates the fan-like lace sections visible in the reference design.

Step 4: Make the scalloped outer edge

For a fuller decorative edge:

Repeat across the lower edge:

1. Sl st into the next space.
2. Ch 1.
3. Work 7 dc into the next space.
4. Ch 1.
5. Sl st into the following space.

Repeat until the entire lower edge is finished.

The scallops should form a soft, rounded fan shape.

Step 5: Crochet the collar flower

Make one flower using the same flower instructions from the slippers.

Attach it near one side of the collar, close to the neckline.

Sew a larger pearl button into the center.

Step 6: Finish the collar closure

At one end of the collar, attach a small button.

At the opposite end, crochet a button loop:

• Join yarn at the corner.
• Ch 8–10.
• Sl st back into the same corner.
• Fasten off.

Adjust the loop to fit the button securely.

Part 3: Finishing and Assembly

Once all pieces are finished:

1. Weave in all loose yarn ends.
2. Check that both slippers have matching dimensions.
3. Sew the flower decorations securely.
4. Attach the pearl buttons.
5. Gently block the collar to open up the lace stitches.
6. Check the strap fit before wearing.
7. Add non-slip dots to the bottom of the slippers if desired.

Safety note: Make sure pearl embellishments and buttons are firmly attached, particularly if the slippers will be worn by children.

Tips for the best results

• Use cotton or cotton-blend yarn to achieve well-defined stitches.
• Keep your tension consistent when crocheting the lace sections.
• Use stitch markers to identify the toe and heel.
• Block the collar gently to make the scalloped edge look neat.
• Choose a slightly smaller hook if your lace stitches look too loose.
• Try the slippers on during construction to get the best fit.

Customization ideas

Classic ivory

Elegant for bridal gifts and special occasions.

Dusty pink

A soft feminine color for a romantic look.

Sage green

A beautiful natural and vintage-inspired finish.

Soft blue

A lovely color for spring and summer.

Frequently Asked Questions

1. Are these crochet Mary Jane slippers suitable for beginners?

The basic slipper construction is approachable for confident beginners, but the lace toe, flower decorations, and matching collar are better suited to intermediate crocheters.

2. Can I make these slippers in a different size?

Yes! Adjust the foundation chain of the sole to change its length, and add or remove rounds to achieve the desired width.

3. What yarn is best for crochet slippers?

Cotton or cotton-blend DK yarn is a good choice because it creates defined stitches and feels comfortable. For extra warmth, you can use a soft acrylic blend.

4. Can I make the slippers without the matching collar?

Absolutely! The Mary Jane slippers are a beautiful standalone project. You can also crochet the collar separately as a decorative accessory.

5. How do I make crochet slippers less slippery?

Apply small dots of non-slip fabric paint to the underside of each sole. Allow it to dry completely before wearing.

Conclusion

These crochet Mary Jane slippers and their matching lace collar are a lovely way to bring vintage-inspired charm into your handmade wardrobe. The delicate openwork, scalloped edges, little flowers, and pearl details make this set truly special.

Choose your favorite yarn color, take your time with the lace details, and enjoy creating a beautiful matching crochet set!

If you make this pattern, share your finished project and let others see your beautiful handmade work.